Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Endstop Check
-[* black] Send an M119 command to check the status of the endstops.
-[* black] They should all report back open.
-[* black] Manually push down the X-Axis endstop and whilst keeping it pushed send the M119 command.
+[* red] Send an M119 command to check the status of the endstops.
+[* green] They should all report back "open".
+[* blue] Manually push down the X-Axis endstop, and whilst keeping it pushed, send the M119 command again. It should report back as "triggered".
+[* violet] Repeat this for the Y-axis endstop also.

Image 1

No previous image

Added

Image 2

No previous image

Added