Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #16

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Motion Check
-[* black] Insert wisdom here.
+[* icon_note] Use the control interface on pronterface to move the printer axes. Make sure to only move 10mm at a time. Because we haven't homed yet there is a potential for a crash so movements need to be small, we are only confirming movement in the correct direction here.
+[* green] ++X-Axis:++ Pressing the left arrow will move the bed to the right, and vice versa.
+ [* icon_reminder] This is correct as the ***nozzle position*** has moved in a negative direction relative to the platform.
+[* blue] ++Y-Axis:++ Pressing the down arrow will move the Hotend towards the front of the printer and vice versa.
+[* orange] ++Z-Axis: ++ Pressing the up arrow on the Z-axis will move the gantry up and vice versa.
+[* icon_caution] If an axis moves in the opposite direction see the next step.

Image 1

No previous image

Added