Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #17

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Inverting Motor Directions
-[* black] If an axis from the previous step moves in the wrong direction power off your printer and disconnect the touchscreen.
+[* black] If an axis from the previous step moves in the wrong direction power off your printer.
[* black] In the aruino IDE go to the "configuration.h" tab.
[* black] Scroll down to lines 1066-1069. (Go to File -> Preferences and check "Display line numbers")
[* black] #define INVERT_X_DIR ++true++
[* black] Change ''false'' to ''true'' to switch the motors direction depending on the problem axis (X, Y or Z).
[* black] Re-upload the firmware.
[* black] Continue from the previous step.