Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Makertech

Edit approved by Makertech


Step Lines

[title] Uploading Marlin Firmware
-[* black] Insert wisdom here.
+[* icon_note] If you haven't already open the Marlin.ino file in the Arduino IDE.
+ [* icon_reminder] AXIS Firmware -> Marlin -> Marlin.ino
+[* blue] Go to tools and set the port to the COM number that is for the AXIS.
+[* green] Make sure that the board and processor are both set to Mega 2560.
+[* orange] Finally upload the firmware to the AXIS.

Image 1

No previous image


Image 2

No previous image