Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Uploading Marlin Firmware
-[* icon_note] If you haven't already open the Marlin.ino file in the Arduino IDE.
- [* icon_reminder] AXIS Firmware -> Marlin -> Marlin.ino
[* blue] Go to tools and set the port to the COM number that is for the AXIS.
[* green] Make sure that the board and processor are both set to Mega 2560.
[* orange] Finally upload the firmware to the AXIS.