Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #23

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

+[title] Z-Offset Cont.
+[* black] Place a folded piece of paper between the nozzle and print surface. Lower the Z axis in 0.1mm increments until the nozzle grips onto the paper.
+[* black] Send M114 again to report the Z-axis position.
+[* black] The amount that you lowered the z axis by is your Z-offset.
+[* black] Enter M206 Z(value)
+[* black] Send and M500 command to save it to the printers memory.