Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #14

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Lead Screw Bracket
[* red] Fix the lead screw bracket to the support beam.
[* icon_reminder] Make sure that it is restingpressing on top of the lead screw cap when secured.
[* icon_reminder] Make sure that it is restingpressing on top of the lead screw cap when secured.
[* green] M4 x 10mm bolt
[* blue] M4 nyloc nut
[* icon_caution] Do not press it down so much thatFix the bracket as flat as possible, if installed at an angle it pusheswill create z-wobble in the lead screw to one sideprint.
[* icon_caution] Do not press it down so much thatFix the bracket as flat as possible, if installed at an angle it pusheswill create z-wobble in the lead screw to one sideprint.