Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Preparing the Heatsink
[* icon_note] Insert an M5 x 20mm bolt with a needle bearing and shim.
[* green] M5 x 20mm Bolt
- [* light_blue] Needle Bearing
+ [* light_blue] Thrust Bearing
[* red] Shim
-[* light_blue] On the other side of the heatsink slide on another needle bearing.
+[* light_blue] On the other side of the heatsink slide on another thrust bearing.