Changes to Step #3
Step Lines
| [title] Heatsink to Backplate | |
| - | [* red] Drop an M5 nut into the back of the Backplate. |
| + | [* red] Begin by preparing the backplate with two M3 x 30mm bolts as shown. |
| + | [* light_blue] Drop an M5 nut into the back of the Backplate. |
| [* green] Fix the assembly together, but making sure that there is no play in the switching motion. | |
| [* icon_note] The bolt should be tightened down enough to allow the heatsink to rock, but there shouldn't be any play along the axis of rotation or on the plane of contact. |
Image 1
Old Version
New Version
Image 2
Old Version
New Version