Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Heatsink to Backplate
[* red] Begin by preparing the backplate with two M3 x 30mm bolts as shown.
[* light_blue] Drop an M5 nut into the back of the Backplate.
-[* green] Fix the assembly together, but making sure that there is no play in the switching motion.
+[* green] Fix the assembly together, making sure that there is no play in the switching motion.
[* icon_note] The bolt should be tightened down enough to allow the heatsink to rock, but there shouldn't be any play along the axis of rotation or on the plane of contact.