Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

[title] Preparing the Heater Blocks
-[* red] Take two heaters and fix them to the heater blocks
+[* red] Take two heaters and fix them to the heater blocks.
[* green] Fix two thermistors to the blocks. We've shown two high temp. thermistors being installed here, but it is identical for the low temp thermistors too.
-[* icon_caution] Note to match the orientation as shown in the photos. The two blocks should be mirrored.
+[* icon_caution] Make sure to match the orientation as shown in the photos. The two blocks should be mirrored.