Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

+[title] Probe Mount
+[* green] Fix the 3D printed probe mount to the metal mount like shown with two M3 x 6mm bolts.
+[* yellow] Remove the nuts and washers from the probe and fix the probe to the mount, again with two M3 x 6mm bolts.
+[* violet] Adjust the probe so that the bottom of it is level with the bottom of the fan shroud, like shown.

Image 1

No previous image

Added

Image 2

No previous image

Added