Changes to Step #11
Step Lines
| + | [title] Installing the Heater Block Assemblies |
|---|---|
| + | [* light_blue] Take the two heater block assemblies from the previous step and install them into the heatsink. |
| + | [* violet] Fix the heater block assemblies in place with two M3 x 12mm bolts. Make sure that they pushed all the way into the heatsink. |
| + | [* icon_note] Note the orientation in the image. The heater side of the block should be facing forward. |
Image 1
No previous image
Added
Image 2
No previous image
Added