Changes to Step #12
Step Lines
| + | [title] Mounting the Switching Hotend Assembly |
|---|---|
| + | [* red] Mount the assembly to your printer's tool carriage with four M3 x 30mm bolts and four M3 x 20mm spacers. |
| + | [* icon_note] We are showing it being mounted onto the 2020 tool carriage from the Proforge 2S. |
| + | [* icon_note] Tighten the bolts by beginning with the bottom two, you will have to tighten each one slightly in turn to prevent it getting jammed up on the heatsink. |
Image 1
No previous image
Added
Image 2
No previous image
Added