Changes to Step #5

Edit by Makertech 3D

Edit approved by Makertech 3D


Step Lines

-[title] Thermistor Tables
-[* violet] Configure the thermistors. For the low temperature thermistor (white cable) select 1. For the high temp thermistor (blue cable) select 560.
-[* icon_note] Make sure to also download both of these temp profiles and place them into your Marlin thermistors folder. Marlin/src/module/thermistor
- [* icon_note] The download is available [link||here].
+[title] Thermistors
+[* icon_note] Set the thermistors:
+ [* yellow] Low temp (white cable) - set as 1
+ [* blue] High temp (blue cable) - set as 560
+[* icon_reminder] If you are running two high temp thermistors, both need to be set to 560.

Image 1

Old Version

New Version