Changes to Step #13

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

+[title] Installing the Heater Block Assemblies
+[* green] Prepare the heatsink by inserting two M3 x 12mm bolts onto each side.
+[* red] Take the two heater block assemblies from the previous step and push them into the heatsink.
+[* blue] With the heater block assemblies pushed in all the way, tighten the bolts to secure them in place.
+[* icon_caution] Note the orientation in the image. The heater side of the block should be facing forward.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added