Install the print fan that has it's shroud facing inwards to the back of the DSE Back Plate.
M4 x 22mm and M4 Nyloc Nut
Mount the probe onto the DSE Back Plate.
The distance between the bottom of the mount and the bottom of the probe should be between 19-21mm if you have the Flexplate installed.
Without the Flexplate it should be between 21-23mm
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.