Attach the side panels to the base with twelve M3 x 8mm bolts and twelve M3 Nyloc Nuts.
The left panel should have the fan mounting holes.
Drop all of the bolts for the panel in first to get the proper alignment.
M3 x 8mm Bolt
M3 Nyloc Nut
A pair of pliers will be needed to hold the nut as you tighten down the bolt.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.