Before handling the board ground yourself by touching a large metal object. Also avoid placing the board on carpet or anything that may cause a static charge.
Fix the black and red power cables into the connector on the control board.
Orient the cables to the right as shown in the photo.
Connect Red to + and Black to - as marked on the board.
Make sure to insert the stripped section of the cable into the connector entirely and to fasten the set screw down TIGHTLY.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.