Fix the ribbon cable to the back of the touch screen display, route it under the control board and connect the other end to the board.
Secure the control board to the base with four M3 x 6mm bolts.
Plug the electronics fan cable into the white port on the control board next to the red connector.
Securely attach the power cable connectors to the terminals on the power supply.
Red = +
Black = -
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.