Take the Idler arm, Spring and M3x16mm bolt.
Place in position the Extruder Spring on the Back Plate.
Compress the spring with the Idler Arm as shown in the second image.
Drop in a M3 x 16mm bolt like shown in the third image.
Tighten down the bolt.
Do not over tighten, the arm should still be able to pivot.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.