Home all of the Axes.
Place the folded piece of paper onto the print surface under Hotend #1
Lower the Z-Axis to your Z-offset height from Step 1. In our case it was 1.9mm.
You should now be able to feel some friction between the paper and nozzle.
Send a T1 command to select the second Hotend.
You should now also be able to feel the same friction between the paper and Hotend #2's nozzle.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.