Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 7 —

Step Type:

Drag to rearrange

Enlarge the Machine Settings window or scroll down the Start G-code box until you get to the ; ----Unique to your setup----- section

Take the Z-offset distance that you made a note off from Stage 09 and subtract it from 3.

So in this case the noted distance was 1.9mm, so our offset will be 3 - 1.9 = 1.1

Enter your calculated offset in place of the 0.0 like shown in the second image.

Your contributions are licensed under the open source Creative Commons license.