Double check that the platform is flat, you may need to bend it against a table edge slightly to get it flat, it doesn’t need to be perfect as auto-levelling will compensate in software.
Fix to the left side of the platform an M4 x 18mm bolt.
M4 x 18mm bolt
Note, the final version of the platform is slightly different to what's photographed. This is where the M4 bolt should be fastened.
Note also the orientation of the platform, the flanged edges should be facing down and the Pi cam mounting hole should be on the bottom left.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.