Use the control interface on pronterface to move the printer axes. Make sure to only move 10mm at a time. Because we haven't homed yet there is a potential for a crash so movements need to be small, we are only confirming movement in the correct direction here.
X-Axis: Pressing the left arrow will move the bed to the right, and vice versa.
This is correct as the nozzle position has moved in a negative direction relative to the platform.
Y-Axis: Pressing the down arrow will move the Hotend towards the front of the printer and vice versa.
Z-Axis: Pressing the up arrow on the Z-axis will move the gantry up and vice versa.
If an axis moves in the opposite direction see the next step.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.