Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 17 —

Step Type:

Drag to rearrange

If an axis from the previous step moves in the wrong direction power off your printer.

In the aruino IDE go to the "configuration.h" tab.

Scroll down to lines 1066-1069. (Go to File -> Preferences and check "Display line numbers")

#define INVERT_X_DIR true

Change false to true to switch the motors direction depending on the problem axis (X, Y or Z).

Re-upload the firmware.

Continue from the previous step.

Your contributions are licensed under the open source Creative Commons license.