Unscrew the bolt on the side of the heater-block by a few millimetres.
Take the heater cartridge and thermistor cable assembly and push the heater cartridge into the large hole...
...and the thermistor into the smaller hole.
Position the Heater cartridge to the centre of the heater-block and fasten town firmly the bolt that clamps it in place.
Take care with thermistor bead, it is fragile!
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.