Fix the 3D printed probe mount to the metal mount like shown with two M3 x 6mm bolts.
Remove the nuts and washers from the probe and fix the probe to the mount, again with two M3 x 6mm bolts.
Adjust the probe so that the bottom of it is level with the bottom of the fan shroud, like shown.
Note, we've had to back track a little here, that's why more of the assembly is done in the images.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.