Mount the assembly to your printer's tool carriage with four M3 x 30mm bolts and four M3 x 20mm spacers.
We are showing it being mounted onto the 2020 tool carriage from the Proforge 2S.
Tighten the bolts by beginning with the bottom two, you will have to tighten each one slightly in turn to prevent it getting jammed up on the heatsink.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.