Pending Edits to Stage 03: Tool Carriage + Gantry

Step #3 edited: [Step edited]

Edited by mike crane (1)

(You don’t have enough reputation to patrol this edit.)

[title] Eddy Probe
[* 9] Before installing the Eddy probe check that the small switch on its back is set to USB mode.
-[* 10] Attach the cable to the Eddy probe and fix it to the back of the master plate.
- [* 2] Eddy Probe (with USB cable)
+[* 10] Attach the supplied USB cable to the Eddy probe and fix it to the back of the master plate.
+ [* 2] Eddy Probe (using USB cable)
[* 5] M3 x 18 FH (Flat Head)