The base is fine in talking about the arm with the hotend
problem with Y axis, wasn’t moving at all when testing so powered down and loosened the eccentric guide a little. Now it works but goes most of the way out then stutters and can’t reach the outer end, then coming back in it gets stuck around the middle. However the guide isn’t tight any more, in fact if I loosen it any more it will be really wobbly.
Also up on the z axis moved the gantry down, is it ok to set the INVERT_Z_DIR to false to remedy this?
why was it so important to have the 1.2m thermistor cables? I had about 60cm excess of those cables that had to be bundled together at this point.
Ok for anyone who had this problem, it worked fine the second time I tried.
when trying to upload I get this error message.
Arduino: 1.8.13 (Windows 10), Board: "Arduino Mega or Mega 2560, ATmega2560 (Mega 2560)"
c:\program files (x86)\arduino\hardware\tools\avr\bin\../lib/gcc/avr/7.3.0/../../../../avr/bin/ar.exe: unable to rename 'core\core.a'; reason: File exists
exit status 1
Error compiling for board Arduino Mega or Mega 2560.
I extracted everything, haven’t moved anything or deviated from the instructions in anyway
In the wiring instructions it says the tmc2208s can be installed on the X, Y, Z and E1. So what is E0 in the configuration list?
I also need to know about this. What's the ‘probe’ and how is it supposed to trigger?
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.