Gabriel Lambert

Nvm, the wiring diagram is what is wrong.

This is wrong, part fan 1 & 2 should be nearer to the stepper driver, the third is for the enclosure fan.

I ended up needing those for the filament runout sensor, so I had to supply my own M3 x 20mm

No mention of the stepper motor cable extension required

M3 x 25mm is what I have left in my bag

Cut 88mm of tubing.

really not the electrical setup we would expect from a uk company…

same, the ones in the bag with the heater wiring are M3

Same, missing m4 tnut and m4 x 6mm

Why was the legs not offset from the extrusion screw holes? My kit did not include the M5 allen key,