Help
Olivier Bertini
@obertini
Olivier Bertini
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 04/29/2022 | |
| 1 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 04/29/2022 | |
Make sure the cables are firmly maintained toward the back so that the bowden tubes won't touch the wires later during the prints.
If you have the enclosure, I would add the top panel now (Stage 07: Enclosure Panels) in order to avoid having to remove the remove the tool head and x-endstop later.
I used this https://d3t0tbmlie281e.cloudfront.net/ig...
Used M4 x 6mm bolts
The distance between the edge of the platform and the 3d printed carriage should be approx. 47mm.