Aiming for a solution of multicolour and support material. This could be achieved by building 2 'dual switch hot-ends' in the X-wagon. To avoid issues, I rather not position both 'active' hot-ends in a printing position, where the not printing hot-end is unpleasantly close to the printed layer.. Is it feasible to program the hot-end switch in such a way, that it will 'park' the inactive set in a half-way position? With my limited knowledge, the hardware should enable this. The logic is doable, but the translation to code is way beyond me. Does anyone have suggestions?
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Aiming for a solution of multicolour and support material. This could be achieved by building 2 'dual switch hot-ends' in the X-wagon. To avoid issues, I rather not position both 'active' hot-ends in a printing position, where the not printing hot-end is unpleasantly close to the printed layer.. Is it feasible to program the hot-end switch in such a way, that it will 'park' the inactive set in a half-way position? With my limited knowledge, the hardware should enable this. The logic is doable, but the translation to code is way beyond me. Does anyone have suggestions?