Brian Mettlen

A double reinforcement. Make sure you use the smaller BIQU motors.

This is the all important step where you realize you used the wrong set of steppers on the base. Sigh.

Now i have to source a crimping tool and connectors. I'll by the time this is over, I'll definitely have a few tools I never had before.

It might take only 45min-1hr for someone who is very familiar with this process. I'm guessing I spent 4 hours or so on this step. Of course, I read everything and double/triple checked everything.

Now I'm gun-shy.

Thank you! I only lost 15min before checking comments.

This step needs to happen before you tighten up the frame. Maybe a warning, early on, that the bottom bolts won't line up unless you loosen bolts on the frame. Also, I agree with Dave Bird. The M6x75s are too long. Now I have to either wait for Amazon or hope my local Home Depot has M6 x 25/35/40 bolts.

It does pay to read the comments before starting. Thanks Brendan.