Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Reputation Breakdown
No reputation gained yet.
29
this is the last picture of the switching servo and still no direction or picture of it with the control arm attached. it won’t switch if nothing switches it
There is no info on connecting the servo arm and anything else to make it switch hot ends. or am i missing a step
If building a Proforge 2s. Only do steps 4, 5, 6 and possibly 8 here. Then jump to the Dual Switching Extruder build in the Upgrade section. It will save you a bit of time.
well looking forward in this stage. it is likely the shims were in with the spacers. gotta say though they look like washers. perhaps in future packaging some labeling
ok well I find no indication of these shims in the parts bag for stage 2 . i found what might be the shims in a bag with a bunch of what look to be eccentric nuts( holes not centered) and possibly spacers. i hope these are the shims and not some part ill need at a later stage of the build