| [document|2|display=list] |
| |
| [title|Dual Switching Extruder Upgrade ONLY (Non-Proforge)] |
| |
| [summary]Build guide for assembling the Dual Switching Extruder to a non-Proforge 3D printer.[/summary] |
| |
| |
| |
| Two Hotends are mounted side by side at an angle with a high torque servo motor to switch between them. |
| |
| The inactive Hotend parks on an ooze shield to prevent contamination and oozing whilst the other Hotend is printing. |
| |
| This setup also removes the need for a priming tower which saves time and material - something that is common in the vast majority of other setups. |
| |
| Available [https://store.makertech3d.com/products/dual-switching-extruder-for-non-proforge-3d-printers|here] for 12V or 24V printers.
|