-
-
Installing the included spool holder is optional, the steps here will show you how to install it to an aluminium extrusion.
-
-
-
Prepare the second spool holder like shown in the images, with the M5x100mm bolt on the left side.
-
Spool Holder
-
M5 x 100mm bolt
-
M5 15mm washer
-
M5 Nyloc Nut
-
-
-
Fasten on to the second spool holder three M5 T-nuts and M5 x 8mm bolts.
-
Fix the second spool holder onto the frame.
-
Almost done!
Finish Line