Skip to main content

Introduction

Thank you for purchasing the AXIS 3D printer!

Before starting any assembly we're going to go through the tools you will need and we'll also make sure that you have everything and that nothing from the kit is missing or broken.

  1. The kit includes a set of allen keys but to complete the build you will also need:
    • The kit includes a set of allen keys but to complete the build you will also need:

    • Scissors, lighter, pliers, phillips head screwdriver, small flat head screw driver and a tape measure.

    • If you have not ordered the FlexPlate upgrade, you will also need a roll of blue painters/masking tape as a surface to print onto.

    • If you get stuck at any point and need help with the assembly or printing something, feel free to post in the official forum.

    • Downloadable resources can be found here.

    • If you're missing a part or have received a faulty/broken one, please use this form here to order a replacement.

    • Want to get in touch? Drop us an email at info@makertech3d.com

    • Upgrades for the AXIS 3D Printer are available for purchase here.

    • Additional components and accessories like nozzles and print surfaces can be found here.

Finish Line

13 other people completed this guide.

Makertech 3D

Member since: 03/09/2018

43,445 Reputation

110 Guides authored

One Comment

here we are at the beginning..

Perrie iles - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 595