-
-
Check that you have everything against the packing list that can be found at the bottom of this page.
-
-
-
Included Tools: Pliers, Allen keys, Cable ties
-
You will also need (not included): Scissors, Lighter, Phillips head screwdriver, Small flat head screwdriver, Tape measure
-
Optional: Electrical Tape, Lubricant for the rails.
-
Missing in some kits is a 3mm Allen key, this is need for the M5 bolts. If you don't already own one, just drop us an email, and we can have one sent out.
-
-
-
If you get stuck at any point or need help with assembly or printing something, feel free to post in the official forum.
-
If you're missing a part or have received a faulty/broken one, please use this form here to order a replacement.
-
Want to get in touch? Drop us an email at info@makertech3d.com
-
Cancel: I did not complete this guide.
4 other people completed this guide.
Attached Documents
3 Comments
I don’t see a way to edit my previous comment to add this: I also found myself using an adjustable wrench, and a larger allen wrench than the 3 included on a number of steps. I don’t have a ready way to check the size on the allen wrench I needed, but it was the one for all the M5 fasteners.
It may be that the pliers will work in place of the adjustable wrench in a pinch. I tend to mangle things whenever I attempt that feat, though.
A 3mm Allen key should have been included for the M5 bolts, if you still need one, please email us at info@makertech3d.com.
A drill bit for deburring the top plate rail holes is later required, but not listed here. 5/32 worked for me, but I think any split point bit between 9/64 and 1/4 would have worked.
