-
-
V2 of the splitter is now shipping with all kits ordered after 1st October 2020.
-
The new design reduces the likelihood of jamming and provides a straighter path for the filament. We've also removed the need for the short ptfe tubes.
-
It is available to also 3d print, the STL files can be found here:
-
-
-
It uses the same hardware already included with the original splitter however you will also need three M3 x 10mm or longer bolts and three M3 nyloc nuts to secure the two halves of the splitter.
-
Cancel: I did not complete this guide.
6 other people completed this guide.
