You're viewing a previously published revision of this guide.  View latest revision

Older
May 03, 2020 - 07:05:04
Jan 05, 2021 - 09:01:11 Aug 23, 2020 - 05:08:28 Aug 14, 2020 - 05:08:44 Aug 13, 2020 - 06:08:40 Aug 13, 2020 - 06:08:18 Aug 10, 2020 - 09:08:39 Aug 08, 2020 - 11:08:05 Aug 08, 2020 - 11:08:46 Jul 30, 2020 - 03:07:57 Jul 28, 2020 - 12:07:23 Jul 11, 2020 - 10:07:26 May 28, 2020 - 07:05:52 May 28, 2020 - 07:05:57 May 28, 2020 - 07:05:02 May 28, 2020 - 07:05:08 May 07, 2020 - 09:05:11 May 07, 2020 - 09:05:03 May 07, 2020 - 09:05:24 May 07, 2020 - 09:05:44 May 07, 2020 - 09:05:37 May 07, 2020 - 09:05:22 May 07, 2020 - 09:05:06 May 07, 2020 - 09:05:24 May 07, 2020 - 09:05:16 May 03, 2020 - 12:05:01 May 03, 2020 - 12:05:35 May 03, 2020 - 12:05:21 May 03, 2020 - 11:05:26 May 03, 2020 - 11:05:43 May 03, 2020 - 11:05:36 May 03, 2020 - 11:05:59 May 03, 2020 - 11:05:46 May 03, 2020 - 11:05:48 May 03, 2020 - 11:05:03 May 03, 2020 - 11:05:18 May 03, 2020 - 11:05:17 May 03, 2020 - 11:05:45 May 03, 2020 - 11:05:38 May 03, 2020 - 10:05:49 May 03, 2020 - 10:05:50 May 03, 2020 - 10:05:04 May 03, 2020 - 10:05:09 May 03, 2020 - 10:05:36 May 03, 2020 - 10:05:04 May 03, 2020 - 07:05:38 May 03, 2020 - 07:05:36 May 03, 2020 - 07:05:42 May 03, 2020 - 07:05:04 May 03, 2020 - 07:05:44 May 03, 2020 - 07:05:41 May 03, 2020 - 06:05:46 May 03, 2020 - 06:05:47 May 03, 2020 - 06:05:59
Newer

Stage 1: Base

Written By: Makertech 3D
  • Comments: 28
  • Favorites: 0
  • Completions: 28

Difficulty

Easy

Steps

2

Time Required

00:30:00 - 01:00:00

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Fix one of the NEMA 17 motors to the base like shown. Nema 17 motor M3 x 6mm

    • Fix one of the NEMA 17 motors to the base like shown.

    • Nema 17 motor

    • M3 x 6mm

    • The cable connector should to be facing upwards.

  2. Align the Z-Pillar to the base like shown in the first image. Align a Motor underneath it also with the connector pointing upwards. Fix everything together with four M3 x 6mm bolts.

    • Align the Z-Pillar to the base like shown in the first image.

    • Align a Motor underneath it also with the connector pointing upwards.

    • Fix everything together with four M3 x 6mm bolts.

Author

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 8

All Time: 1,839