1. Before installing the Switching Hotend you may find it useful to have a CAD model of it.  You can find a STEP file of the DSH from the link below:
    • Before installing the Switching Hotend you may find it useful to have a CAD model of it. You can find a STEP file of the DSH from the link below:

    • DSHv2 GitHub

    • The kit does not come with extruders. The hotend is Bowden type so you will need your own Bowden style extruders.

    • The DSH fixes onto your gantry by 4x M3 bolts spaced 31mm apart from each other. This is the same hole spacing found on NEMA 17 motors.

    • If your printers gantry is a piece of 2020 aluminium extrusion you may be able to use the Proforge 2S tool carriage, available for separate purchase here.

Finish Line

Makertech 3D

Member since: 03/09/2018

32,840 Reputation

85 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 37

All Time: 436