Difficulty
Moderate
Steps
2
Time Required
- Stage 03: Tool Carraige 2 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
The DSH requires four M3 mounting holes, 31mm apart from each other.
-
If your printers gantry is a piece of 2020 aluminium extrusion you may be able to use the Proforge 2S tool carriage, available for separate purchase here.
-
-
-
Roller Assembly x4:
-
Create a roller assembly by pressing two 625zz bearings into a delrin roller wheel with a 1mm shim between them.
-
Delrin Roller Wheel
-
Delrin Roller Wheel
-
Precision Shim
-
You may need to use a pair of pliers to force the bearings into the delrin wheel.
-
