You're viewing a previously published revision of this guide.  View latest revision

Older
May 07, 2020 - 10:05:42
Aug 03, 2020 - 06:08:16 May 28, 2020 - 07:05:15 May 28, 2020 - 07:05:42 May 28, 2020 - 07:05:29 May 13, 2020 - 08:05:57 May 12, 2020 - 02:05:07 May 12, 2020 - 01:05:23 May 12, 2020 - 01:05:50 May 08, 2020 - 03:05:34 May 08, 2020 - 02:05:12 May 08, 2020 - 02:05:41 May 08, 2020 - 02:05:59 May 08, 2020 - 02:05:35 May 08, 2020 - 02:05:46 May 08, 2020 - 02:05:38 May 08, 2020 - 02:05:42 May 07, 2020 - 11:05:15 May 07, 2020 - 11:05:57 May 07, 2020 - 10:05:42 May 07, 2020 - 10:05:12 May 07, 2020 - 10:05:23
Newer

Stage 5: Print Head

Written By: Makertech 3D
  • Comments: 5
  • Favorites: 0
  • Completions: 23

Difficulty

Moderate

Steps

1

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Fasten onto the print head carriage two M3 x 20mm bolts. M3 x 20mm bolts

    • Fasten onto the print head carriage two M3 x 20mm bolts.

    • M3 x 20mm bolts

    • M3 nyloc nut

Author

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 5

All Time: 1,376