Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
  1. Extruder Spring
    • Extruder Spring

    • Drive Gear

    • Idler Arm

    • Back Plate

    • Coupling Mount

  2. Fix the back plate to the motor face. M3 x 6mm bolt
    • Fix the back plate to the motor face.

    • M3 x 6mm bolt

    • Match the orientation of the motors connector.

  3. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 5

All Time: 1,097