You're viewing a previously published revision of this guide.  View latest revision

Older
Feb 10, 2022 - 07:02:43
May 27, 2022 - 04:05:02 Apr 09, 2022 - 11:04:19 Apr 07, 2022 - 07:04:45 Apr 07, 2022 - 07:04:17 Apr 07, 2022 - 07:04:09 Apr 07, 2022 - 07:04:24 Apr 06, 2022 - 09:04:02 Apr 06, 2022 - 07:04:34 Apr 06, 2022 - 07:04:51 Apr 06, 2022 - 07:04:03 Apr 05, 2022 - 10:04:02 Apr 05, 2022 - 07:04:07 Apr 05, 2022 - 07:04:39 Apr 04, 2022 - 04:04:50 Apr 04, 2022 - 04:04:01 Mar 10, 2022 - 08:03:20 Mar 10, 2022 - 08:03:13 Mar 10, 2022 - 08:03:48 Mar 10, 2022 - 04:03:44 Mar 08, 2022 - 08:03:28 Mar 08, 2022 - 08:03:15 Mar 06, 2022 - 05:03:05 Mar 06, 2022 - 04:03:02 Mar 06, 2022 - 04:03:24 Mar 06, 2022 - 04:03:16 Mar 06, 2022 - 04:03:58 Mar 06, 2022 - 04:03:45 Mar 06, 2022 - 04:03:43 Mar 06, 2022 - 04:03:01 Mar 06, 2022 - 04:03:44 Mar 06, 2022 - 04:03:09 Mar 06, 2022 - 04:03:54 Mar 06, 2022 - 04:03:42 Mar 06, 2022 - 04:03:52 Mar 06, 2022 - 04:03:32 Mar 06, 2022 - 04:03:16 Mar 02, 2022 - 05:03:10 Mar 01, 2022 - 01:03:59 Mar 01, 2022 - 01:03:42 Mar 01, 2022 - 01:03:03 Mar 01, 2022 - 01:03:53 Mar 01, 2022 - 01:03:44 Mar 01, 2022 - 01:03:46 Mar 01, 2022 - 01:03:05 Mar 01, 2022 - 01:03:38 Mar 01, 2022 - 01:03:46 Mar 01, 2022 - 01:03:36 Mar 01, 2022 - 01:03:14 Mar 01, 2022 - 01:03:00 Mar 01, 2022 - 01:03:51 Mar 01, 2022 - 01:03:52 Mar 01, 2022 - 01:03:03 Mar 01, 2022 - 01:03:41 Mar 01, 2022 - 12:03:28 Mar 01, 2022 - 12:03:02 Mar 01, 2022 - 12:03:17 Mar 01, 2022 - 12:03:15 Mar 01, 2022 - 12:03:05 Mar 01, 2022 - 12:03:26 Mar 01, 2022 - 10:03:31 Mar 01, 2022 - 09:03:41 Mar 01, 2022 - 09:03:34 Mar 01, 2022 - 09:03:45 Mar 01, 2022 - 08:03:50 Mar 01, 2022 - 08:03:13 Mar 01, 2022 - 08:03:35 Mar 01, 2022 - 07:03:05 Mar 01, 2022 - 07:03:34 Mar 01, 2022 - 07:03:46 Mar 01, 2022 - 07:03:49 Mar 01, 2022 - 07:03:27 Mar 01, 2022 - 07:03:37 Mar 01, 2022 - 07:03:26 Mar 01, 2022 - 07:03:08 Mar 01, 2022 - 07:03:30 Mar 01, 2022 - 07:03:53 Mar 01, 2022 - 07:03:04 Mar 01, 2022 - 07:03:33 Mar 01, 2022 - 07:03:05 Mar 01, 2022 - 07:03:37 Mar 01, 2022 - 07:03:09 Mar 01, 2022 - 07:03:00 Mar 01, 2022 - 07:03:31 Mar 01, 2022 - 07:03:48 Mar 01, 2022 - 06:03:09 Feb 27, 2022 - 08:02:42 Feb 11, 2022 - 07:02:01 Feb 11, 2022 - 07:02:58 Feb 11, 2022 - 07:02:52 Feb 11, 2022 - 07:02:09 Feb 11, 2022 - 07:02:41 Feb 11, 2022 - 07:02:43 Feb 10, 2022 - 08:02:38 Feb 10, 2022 - 08:02:34 Feb 10, 2022 - 08:02:16 Feb 10, 2022 - 08:02:58 Feb 10, 2022 - 08:02:58 Feb 10, 2022 - 08:02:34 Feb 10, 2022 - 08:02:08 Feb 10, 2022 - 08:02:44 Feb 10, 2022 - 08:02:58 Feb 10, 2022 - 08:02:26 Feb 10, 2022 - 08:02:38 Feb 10, 2022 - 08:02:01 Feb 10, 2022 - 08:02:35 Feb 10, 2022 - 08:02:35 Feb 10, 2022 - 08:02:21 Feb 10, 2022 - 08:02:47 Feb 10, 2022 - 08:02:37 Feb 10, 2022 - 08:02:29 Feb 10, 2022 - 08:02:00 Feb 10, 2022 - 08:02:12 Feb 10, 2022 - 08:02:42 Feb 10, 2022 - 08:02:40 Feb 10, 2022 - 07:02:17 Feb 10, 2022 - 07:02:58 Feb 10, 2022 - 07:02:10 Feb 10, 2022 - 07:02:39 Feb 10, 2022 - 07:02:11 Feb 10, 2022 - 07:02:46 Feb 10, 2022 - 07:02:03 Feb 10, 2022 - 07:02:07 Feb 10, 2022 - 07:02:17 Feb 10, 2022 - 07:02:02 Feb 10, 2022 - 07:02:43 Feb 10, 2022 - 07:02:17 Feb 10, 2022 - 07:02:30 Feb 10, 2022 - 07:02:07 Feb 10, 2022 - 07:02:48 Feb 10, 2022 - 07:02:15 Feb 10, 2022 - 07:02:20 Feb 10, 2022 - 07:02:03 Feb 10, 2022 - 07:02:53 Feb 10, 2022 - 07:02:08 Feb 10, 2022 - 07:02:39 Feb 10, 2022 - 07:02:08 Feb 10, 2022 - 07:02:09 Feb 10, 2022 - 07:02:00 Feb 10, 2022 - 07:02:17 Feb 10, 2022 - 07:02:10 Feb 10, 2022 - 07:02:00 Feb 10, 2022 - 07:02:07 Feb 10, 2022 - 07:02:21 Feb 09, 2022 - 07:02:14 Feb 07, 2022 - 05:02:12 Feb 07, 2022 - 05:02:55 Feb 07, 2022 - 05:02:41 Feb 07, 2022 - 05:02:31 Feb 07, 2022 - 05:02:05 Feb 07, 2022 - 05:02:48 Feb 07, 2022 - 05:02:35 Feb 07, 2022 - 04:02:02 Feb 07, 2022 - 04:02:49 Feb 07, 2022 - 04:02:37 Feb 07, 2022 - 04:02:14 Feb 07, 2022 - 04:02:09 Feb 07, 2022 - 04:02:53 Feb 07, 2022 - 04:02:44 Feb 07, 2022 - 04:02:27 Feb 07, 2022 - 04:02:16 Feb 07, 2022 - 04:02:28 Feb 07, 2022 - 04:02:46 Feb 07, 2022 - 04:02:34 Feb 07, 2022 - 04:02:30 Feb 07, 2022 - 04:02:12 Feb 01, 2022 - 08:02:47 Feb 01, 2022 - 08:02:52 Feb 01, 2022 - 08:02:02 Feb 01, 2022 - 08:02:32 Feb 01, 2022 - 08:02:27 Feb 01, 2022 - 08:02:45 Feb 01, 2022 - 08:02:38 Feb 01, 2022 - 08:02:43 Feb 01, 2022 - 08:02:57 Feb 01, 2022 - 08:02:43 Feb 01, 2022 - 08:02:27 Feb 01, 2022 - 08:02:10
Newer

Stage 08: Programming

Written By: Makertech 3D
  • Comments: 15
  • Favorites: 0
  • Completions: 2

Difficulty

Moderate

Steps

22

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

    • Download the Marlin firmware depending on your configuration:

    • 24V Heated Bed

    • MIC-6 Heated Bed

    • Copy the firmware.bin file over to the micro SD card.

    • Insert the SD card into your control board.

    • Download the displays firmware here.

    • Copy the files onto the SD card.

    • Insert the SD card into the display.

  3. Double check all of your wiring with the wiring diagram.

    • Double check all of your wiring with the wiring diagram.

    • In particular, your wiring of the power supply and heated bed.

  4. Plug the power cable into the back of the printer. Power on with the switch on the fron of the base.

    • Plug the power cable into the back of the printer.

    • Power on with the switch on the fron of the base.

  5. Powering on for the first time should result in the following: The Touch Screen Display should power on and begin updating. The Hotend cooling fan should spin.

    • Powering on for the first time should result in the following:

    • The Touch Screen Display should power on and begin updating.

    • The Hotend cooling fan should spin.

    • The electronics fan should spin.

    • The LED's should light up.

    • Once the touch screen has been updated remove the SD card.

    • Delete the contents of the SD card, it should now be ready to use with your printer.

    • Thermistors should read room temperature.

    • You may find that the hotend thermistor is a little off, that's OK as it's a high temp thermistor it may be slightly inaccurate at temps below 100C.

  8. Click on Menu. Select terminal. Send an M119 command.

    • Click on Menu.

    • Select terminal.

    • Send an M119 command.

    • Move the tool head to the bottom left as shown.

    • Both the X and Y endstops should be triggered.

    • Insert wisdom here.

    • Insert wisdom here.

    • Insert wisdom here.

    • Insert wisdom here.

    • Insert wisdom here.

    • Insert wisdom here.

    • Insert wisdom here.

    • Insert wisdom here.

    • Insert wisdom here.

    • Insert wisdom here.

    • Insert wisdom here.

    • Insert wisdom here.

Author

Makertech 3D

Member since: 3/9/18

51,315 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 3

All Time: 1,306