You're viewing a previously published revision of this guide.  View latest revision

Older
May 20, 2024 - 06:05:43
May 21, 2024 - 03:05:05 May 20, 2024 - 10:05:24 May 20, 2024 - 10:05:13 May 20, 2024 - 10:05:27 May 20, 2024 - 10:05:04 May 20, 2024 - 09:05:58 May 20, 2024 - 09:05:06 May 20, 2024 - 09:05:12 May 20, 2024 - 06:05:51 May 20, 2024 - 06:05:43 May 20, 2024 - 06:05:23 May 20, 2024 - 06:05:52 May 20, 2024 - 06:05:42 May 14, 2024 - 03:05:41 May 10, 2024 - 03:05:15
Newer

Upgrade: Cable Supports

Written By: Makertech 3D
  • Comments: 4
  • Favorites: 0

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

    • Mount the cable relief bracket to the rear inside of the frame.

    • Rear Cable Relief Bracket

    • M4x6mm Button

    • M4 T- Nut

    • Remove the old and mount the new cable relief bracket to the tool carriage.

    • Use cable ties to fix the cable support to the cable loom, you may need to pull some of the loom from the base to fix onto the cable support.

    • Mount the print head cable support guides to the print head cables and PTFE tubes using cable ties.

Author

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 12

All Time: 473