Changes to Step #10
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] X/Y Motor Cables |
|---|---|
| + | [* 5] Connect a motor cable to the X/Y Motors and route them down the side of the 2040 Extrusion. |
| + | [* 11] Use electrical tape to hide and secure in place. |
| + | [* 10] Connect the motor cables to the control board. |
| + | [* 7] Left Motor |
| + | [* 2] Right Motor |
Image 1
No previous image
Added
Image 2
No previous image
Added