Changes to Step #14
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Hotend Heaters | |
| [* 7] Take the ***left*** sides hotend heater and attach the cables to this connector. | |
| [* 2] Take the ***right*** sides hotend heater and attach the cables to this connector. | |
| + | [* 11] The connector can actually be pulled out of the board to make connecting the cables easier. |
| + | [* 11] You will need a small flat head screw driver for this step. |